ELEVAH
AERIAL PLATFORMS
ELEVAH 40B
Perfect for maintenance and installation activities
Elevah 40B is a push around automatic lifting platform that allows working up to a maximum of 4 m. Handy and efficient, it is perfect for maintenance and installation activities in various environments, from shops to industry.
The Elevah 40B allows optimising times and reducing operators’ efforts. To move the machine, simply grab the handles and press the buttons, thus releasing the brakes and allowing transport. Once you have reached the desired position, simply release the buttons and the machine returns to braking position. Once positioned, simply access the basket and operate the control to reach the desired height. In this way, the operator can work at height effortlessly and in maximum comfort.
- Maximum capacity control via relief valve
- Light movement indicator
- Automatic electronic parking brake
- 2-sash access doors to basket with closure control
- Joystick with safety catch against accidental activation
- IP65 protected drive wheels
- Manually activated emergency descent of the basket to base
- Two-hand operation
- Electronics, power supply and batteries equipment
- Proportional type self-propulsion
- Proportional basket lifting
- Lifting block with 80% batteries
- Hour meter and battery charge indicator on basket
- Multi-voltage and multi-frequency battery charger 6A – 115V – 230V – 50/60Hz.
- High resistance batteries AGM 24V – 50A
- Protection for the operator’s head above the cage. Made of steel, it protects the operator should small objects fall from above
- Crushing protection under the basket
- External protection for the Basket
- Machine start-up with code (only for 24 Volt version)
- Configurable machine height block
- Removable objects holder platform, 40 kg capacity
- Ergonomics and functionality equipment
- Two Upholstered Covers 50 cm
- Current socket on the basket. 24 V/5 A
- Socket on board basket with USB socket
- Unloading system of the machine from truck platform without forklift
- Side rollers wide 880 mm, to drive through shelf aisles
- Side rollers wide 980 mm, to drive through shelf aisles
- Side rollers wide 1020 mm, to drive through shelf aisles
- Resistant tarpaulin
- Wooden Crate for shipping
- Additional machine up and down control only for loading-unloading on van
- Loading system for ramps. It can only be used with the addition of the controls at the base of the machine: also select the E40CR accessory
- IP65 Certification. Requires AGM batteries
- Batteries (Lithium Batteries 12.8V 50Ah)
- Colours (Elevah 40 galvanised and then painted, it guarantees higher resistance to atmospheric agents)
- Base painted grey (RAL 7016) with white finishing (RAL 1013)
- Base painted grey (RAL 7016) with green finishing (RAL 6011)
| Parameter | Specification |
|---|---|
| Max. working height | 4 m |
| Max capacity | 200 kg |
| Number of people | 1 |
| Use | Internal |
| Machine weight | 265 kg |
| A Closed machine height | 1730 mm |
| B Min. height from the ground | 290 mm |
| C Maximum platform height | 1950 mm |
| D Base overall dimensions (L) | 1000 mm |
| E Base overall dimensions (W) | 715 mm |
| F Cage dimensions (L) | 685 mm |
| G Cage dimensions (W) | 580 mm |
| Idle front wheel size | Ø 125×35 |
| Idle rear wheels size | Ø 150×40 |
| Power supply | 24 V |
| Batteries | 2 AGM 12V 45 Ah |
| Battery charger | 115V–230V 50/60Hz |
| H Maximum climbing ability | 15 % |
| Internal turning radius | 0 R |
| External turning radius | 860 mm |
| Max. speed (rising) | 0.15 m/s |
| Max. speed (descending) | 0.15 m/s |
| I Maximum pressure for wheel at full load | 1.55 kN |